LS12
01-06-2008, 12:22 PM
This is a guide how to add a Custom Graveyard! (I used navicat) :):):)
Part 1
First connect to your DB and open "graveyards"
then you will se a table with some info!
ID: Position_X: Position_Y: Position_Z: Orientation: ZoneID:
adjacentzoneid: Mapid: faction: name:
Part 2
Start your server and login use .gps and write down the info it shows evrything!!
Now create a new record now write 386 or higher in ID row!
go to Position_X and write in X cordinates do the same on Y and Z write in Y cords and Z cords
go to Orientation and write in the info you writed down from .gps orientation
then in Zoneid: same there as the Orientation
You should only leave adjacentzoneid at 0
mapid: can bee diffrent but do as same as Zoneid:
in .gps you will see Map: [Number] i use 0 if i am in Azeroth (not instance)
if you are in dire maul it will bee 1 on mapid
faction:
I think the factions is 1 = Alliance 2 = Horde 3 = Neutral i would use 3.
Don't forget to write in the name of your graveyard!
Then there is only the name left and then you are done you have to restart server or use .reloadtable Graveyards
if you think this guide is hard to understand go to Lilnate22 guide
Lilnate22 guide link:
http://www.ac-web.org/forum/showthread.php?t=3076&highlight=Custom+Graveyard
Plz make a post of what you think of this guide
Part 1
First connect to your DB and open "graveyards"
then you will se a table with some info!
ID: Position_X: Position_Y: Position_Z: Orientation: ZoneID:
adjacentzoneid: Mapid: faction: name:
Part 2
Start your server and login use .gps and write down the info it shows evrything!!
Now create a new record now write 386 or higher in ID row!
go to Position_X and write in X cordinates do the same on Y and Z write in Y cords and Z cords
go to Orientation and write in the info you writed down from .gps orientation
then in Zoneid: same there as the Orientation
You should only leave adjacentzoneid at 0
mapid: can bee diffrent but do as same as Zoneid:
in .gps you will see Map: [Number] i use 0 if i am in Azeroth (not instance)
if you are in dire maul it will bee 1 on mapid
faction:
I think the factions is 1 = Alliance 2 = Horde 3 = Neutral i would use 3.
Don't forget to write in the name of your graveyard!
Then there is only the name left and then you are done you have to restart server or use .reloadtable Graveyards
if you think this guide is hard to understand go to Lilnate22 guide
Lilnate22 guide link:
http://www.ac-web.org/forum/showthread.php?t=3076&highlight=Custom+Graveyard
Plz make a post of what you think of this guide