PDA

View Full Version : [Tutorial] How to avoid the Logging Into Game Server


spearman360
11-22-2007, 02:20 PM
First of all, your default port number for your server is basically 8129. You have to open that port. I only know how to open ports with NetGear.

http://i94.photobucket.com/albums/l112/makuuta99/Ports.jpg

Open those ports for your router or disable every firewall you have. Now you see I have 8129, 8130, 8131, and 8132 open. That's because I have 4 Realms. Now, look at these configs:

http://i94.photobucket.com/albums/l112/makuuta99/Ports2-1.jpg

Those are 4 different ports for my 4 realms. Everytime you create a new realm, you have to change that port. For instance, my 1st server port was 8129, I decided to make a second folder and all that stuff. Now I have to change the port in the ascent.conf in my second folder to 8130. Now look at these:

http://i94.photobucket.com/albums/l112/makuuta99/Ports3.jpg

Still different ports for each. Now remember to open a new port in your router and change it in those configs. Don't worry about logonserver.conf Then your good, shouldn't get stuck at Logging Into Game Server. Make sure to click Start, click Run, and type cmd, in that window, type ipconfig and find the address that says 192.168. and the 2 numbers there. Check it daily too. Because if your ip is 192.168.1.3 and you have your ports open for 192.168.1.2, then you need to edit ALL those ports and make them open for 192.168.1.3. Thanks for reading thise, hopes this helps you.

IMOS
11-22-2007, 05:25 PM
What if you don't have a router and use a DSL modem to connect to internet?

spearman360
11-22-2007, 05:59 PM
Then just disable your firewall.

Absolute Zero
11-24-2007, 05:37 PM
What if you don't have a router and use a DSL modem to connect to internet?

you cant make your server public with a modem unfortunately :(
unless u use hamachi...

LS12
12-08-2007, 05:44 PM
Hamachi sucks it does so evryone can get into your CPU i tested with a friend and he could see all my maps programs and that!

kevingaze
12-09-2007, 01:58 AM
hey im using a Linksys router and i have the two servers listed in the other guide you know the one for your IP and the one for the web your suposed to have two set up but im only running one actual server do they need to have difrent ports open for them? cause im getting this problem alot and i cant figure out how to fix it....but im not running two or more servers, i cant get this thing to conect over the web it always shows up and then says loggin in to server and that is it ....i can see my lan and web severs listed over teh net in log in and i read someware not to worry that no one will see it but me..but i can see both when i test at my buddys house? any help is apreciated!