ArcEmu Repack .~*Fully Spawned!*~.

[Tsoforever2]

Closed because of sanders on ac-web

[RavenxVoid]

Woot good job i have been waiting forever for a repack with northrend fully spawned

[sammyg69]

thats very good it looks nice but my balls itch and when that happens it tells me sumthing is wrong

[ziifnabald]

Props once again Tso! I assume this is Rel 8.0? I don't know how you do it, but you almost release new versions faster than I can test ;)
TY

[Simzy]

Yes from the dates of it, it is v8

[herculis]

OMG HAAH NICE!!!Xdddddd

[trunks94]

Just to know, Uploading Vmaps and Maps is illegal, isn't it?
But nice one, gonna test out

[sammyg69]

no its not illegal at all

[Wowwow1]

do the mobs in northrend have loot?

[Modder420]

Nicely done.

[behind~you]

good work!!! i knew you could do it ..........holly shet it's working ....thanks ..

this is a version of that arcemu you created with 7 versions?...this is the v8??

damn...when i start the installer from the "direct link" it's working..but the last file says is corupted and i need a fresh copy of arcemu.......
but the oder file ("miror") works fine :D

and another thing...tso you forgot to spawn the boss from the hearth of (idk)...that boss that was blue and was "near" lich king....at 10 meters to him...the one who gave the quests with the runed blade or the hunger of ....and the telleporter doesn't work ...that circle (eye) ...if some1 could repair this ...i think you will be....i couldn't post the bugs on that forum idk why ...and i posted them here...:D

[sycspysycspy]

is the npc attack timer fixed? there is no way to win any elite if they attack that fast.

[flc624]

TSO, you rule girl! :)) THANK YOU THANK YOU!

[Sloff1155]

how do you fix Cold Weather Flying on your server???????????

[Tsoforever2]

Thank you everyone :) I am playing a server while making this repack! Come check it out .Its on my other thread.

[CrazyJonny]

Do i have to down load a seperate map extractor?

[IIccEE]

Hi TSO!

First , Thanx for this great Repack!

Just a question...

Is it just me or I can't get out of the starting area where the lich king is???

The "eye portal" does not work and I think some mobs are not all there like the one that gives you the runed sword quest?

Thanx again !

[iamop1337]

i got o choose realm blizzlike adn just sits on connecting

[paris15]

nice job ty +rep

[arninho]

i cant start Mysql it gives me an error
P.S i have just instaled the windows :\
Tsoforever2 on what server you play?

[cryder]

After downloading and extracting I can't seem to find the server in my C:\ folder, and I also tried to extract it to F:\ just to check but still can't see it, is it any special name for the folder?

[Gnome]

What ArcEmu rev is it?

And does the Mobs have Loots?

[winkdog]

After downloading and extracting I can't seem to find the server in my C:\ folder, and I also tried to extract it to F:\ just to check but still can't see it, is it any special name for the folder?

If you didn't set the destination when the .exe file opened it might be in C:\user\user\Downloads. If not just open the .exe file again and look at the bottom and it should show the destination file it was sent to.

i cant start Mysql it gives me an error
P.S i have just instaled the windows :\
Tsoforever2 on what server you play?

Arninho try running the MySQL as administrator that has helped some people.

[cryder]

If you didn't set the destination when the .exe file opened it might be in C:\user\user\Downloads. If not just open the .exe file again and look at the bottom and it should show the destination file it was sent to.

I set the destination as C:\ as the first post says and didn't find it. Now I tried again trying to set it as F:\ArcEmu and it never made a folder called ArcEmu in on my F-Disc and the server files were never extracted

[amokz]

Tso mate this repack is the version 7 right?

[aliexo]

tso.. damn ur fast... but do i still need to configure mobs myself? (so they hit me and do dmg?)

[winkdog]

cryder I'm sorry I misunderstood. You might have gotten a corrupt file. The first one I DLed was I used the direct link. Then I used the mirror link and got a good file.

[greengohome]

Hey! Good job, really! It may sound newbish, but..... Do I have to uninstall/delete the AC-Web Repack that I used with 2.4.3? Because I just don't want to screw up.

[aliexo]

Hey! Good job, really! It may sound newbish, but..... Do I have to uninstall/delete the AC-Web Repack that I used with 2.4.3? Because I just don't want to screw up.

u dont have to no. but u can.

[cryder]

I used the mirror link too though, so that can't really be the problem, hehe

[yuniorvoltes]

Hi somebody can tell me how i modify the NPCs Damage and Spell Dabage in a Arc-Emu servers????

[arninho]

If you didn't set the destination when the .exe file opened it might be in C:\user\user\Downloads. If not just open the .exe file again and look at the bottom and it should show the destination file it was sent to.



Arninho try running the MySQL as administrator that has helped some people.
I'm administrator

[greengohome]

The application has failed to start because this application configuration is incorrect. Don't you all receive this error? If not, then I did screw up something....But what?



PS: Do I need to modify the config. files myself? And change them however I want?



Pls Answer~!

[arninho]

I get these error http://img65.imageshack.us/img65/8194/42698468ui9.th.jpg (http://img65.imageshack.us/my.php?image=42698468ui9.jpg)

[winkdog]

I'm administrator

No I meant right click on MySQL then go down to were it says run as administrator and left click that and see if that works for you.

[greengohome]

I also get the error arninho gets at mysql. The other error is received when opening world/logonserver.

PLEASE help!

[winkdog]

The application has failed to start because this application configuration is incorrect. Don't you all receive this error? If not, then I did screw up something....But what?



PS: Do I need to modify the config. files myself? And change them however I want?



Pls Answer~!

green make shure your repack is on your C:/ like this C:/ArcEmu Blizzlike

[arninho]

No I meant right click on MySQL then go down to were it says run as administrator and left click that and see if that works for you.

Cant find that think whit administrator:|

[winkdog]

I also get the error arninho gets at mysql. The other error is received when opening world/logonserver.

PLEASE help!

I have vista and the same happens to me. You have to run the ArcEmu world as administrator to get it to work. Its some kind of compatibility problem.

Cant find that think whit administrator:|

What OS are you using? I am using vista. If your not it might be located some place else.

[matward]

Bugs so far-
*Many NPC's are missing (Orgrimmar, Stormwind etc)
*NPC's with incorrect way-point data
*Many NPC's do not carry weapons
*The command .waypoint delete crashes server
*Grommash Hold in Orgrimmar is only partially spawned
*Random vendors, Drix Blackwrench and Mojodishu, spawned throughout Orgrimmar.


Finding more as I play...

Good repack!

[arninho]

Windows Xp Service pack 3

[winkdog]

Windows Xp Service pack 3

Ok I never used the XP service pack 3 before but I just did some research and microsoft says to give administrative privilege right click on what you want. It will open a window in that window go down to were it says run as administrator and left click on it. If your system doesn't have that option you might want to visit the Microsoft site for more info. Sorry I couldn't help.

[Gnome]

Hmm, I imported the Creature_Spawns to my DB and now 100% of Northrend is double spawned + some others Creatures, Shouldn't be like that becouse if it is an already exists in the DB it should ignore it.

[arninho]

So ... none can help me? :(( /cry

[Battlecow]

So ... none can help me? :(( /cry

right-click on msql/run as../click administrator/enter administrator password
that should work : )

hmm just realised, you cant run as cos it isnt a .exe file :S sorry nope cant help

[greengohome]

Thanks for your help. I tried it, I put a password on Administrator, I right-click it, press Run As, select Administrator, write password and press enter. Anyway, the same error shows up. Don't you think it could be a problem with the config files? I downloaded both direct link and mirror, and installed in C, D, E, but the same problem.

[suna99]

My map and vmap assembler dont stay on screen(goes away after like 10 millisec) And i do get this error when starting world.exe:1249

This is the first time i actually runs a PS so it had been fine with a SIMPLE guide how to add own items/NPC


EDIT: Strange! now it did work, but i had to start it over and over and over and over....

[greengohome]

I have a question to ask you. Did it work to ANYONE? Then, share, people! Tell us how!

[Bugmenot]

Hey guys,

Im getting this problem when i load up world.exe

http://www.4freeimagehost.com/uploads/c2e6748d1670.jpg

Then immediately after that last error message, the exe window closes. This happens every time i load it up. Any suggestions?

[Cassidy]

Going to try this.
Will give rep if it's good. :)

[druja05]

So, the Death Knight's fully work? With their quests, teleportation on the eye thing, and all that lovely stuff? *crosses fingers*

[Somerandom17]

This seems like a very well made repack ill be sure to try it out :)

[druja05]

It's still missing the correct quest npcs and other such thing from the Death Knight area and the teleporting eye thing is not workign either.

[carli593]

im missing charcter files that prevents -world from running and it crashes itself this is way to unstable if you ask me

[tylerthe3]

noooooooooo! i cant find my gouhl!

[jtntime09]

Hey,
I tried running ad.exe and it doesn't extract the maps, it gives an error about opening it and I have .net frame work. Can anyone upload it to Filebeam - Free Fast File Hosting (http://filebeam.com/) ? +rep if you do and give me link.

[Frenzy]

is the teleporter behind Lich king non-functional? when I step in it nothing happens?

[Tsoforever2]

No "posted by NC-Db its an unknown typ of gameobject and they are looking for a way"

[ZOLAR]

all i get from the exe when i install to c:/ is a core and no databases

[grey69]

If anyone has the issue i had, "stuck on connected"

Go take a look here http://www.ac-web.org/forum/support/40626-stuck-connected-fix.html

And for people who cannot start MySQL, i'll post again since i still see people having issue with it... maybe i should post in Support section. Hint for repack makers.. change the my.cnf, there are countless post about this error and yet the permanent fix is so easy.


mod your my.cnf inside "\ArcEmu Blizzlike\Server\mysql\bin"

# The MySQL server
[mysqld]
basedir="../mysql/mysql"
tmpdir="../mysql/tmp"
datadir="../mysql/mysql/data"

[WinMySQLadmin]
Server="../mysql/mysql/bin/mysqld.exe"


No more "Can't find message file '\arcemu blizzlike\server\mysql\share\english\errmsg.sys" when user has extracted the repack elsewhere than C:\


http://www.ac-web.org/forum/releases/40470-arcemu-repack-service-4.html#post326618

Peace

[sammyg69]

ah another 69 in the family hey sup

[mcydes]

Great WORK Poison +rep +rep +rep +rep +rep :D

[mrmaple24]

Do the DK starting quests work?

[keokitsune]

i dont get it sh whats the username and password to logon? or am i missing sompthing i instald everything on the list and am runing the mysql and the 2 other things

[mrmaple24]

i dont get it sh whats the username and password to logon? or am i missing sompthing i instald everything on the list and am runing the mysql and the 2 other things

It should be admin/admin

[keokitsune]

admin/admin dosnt work i then exited everything and reran all as as admin, still dosnt work

[Tsoforever2]

did you set your realmlist in the data/enus folder?

[keokitsune]

ok i fixed it and it working now
thnks.

Do the DK starting quests work?

no one major quest giver that dose the runeforge quests is missing, and runeforgeing didnt work for me with the bloodelf

[Tsoforever2]

no one major quest giver that dose the runeforge quests is missing, and runeforgeing didnt work for me with the bloodelf

Runeforgeing works but ncdb in the changelog are adding it to the database soon just wait :)

[obievil]

I get these error http://img65.imageshack.us/img65/8194/42698468ui9.th.jpg (http://img65.imageshack.us/my.php?image=42698468ui9.jpg)


it's being demanding, it has to be installed at C:\ArcEmu Blizzlike

or it will not load.

[lyk13]

it's being demanding, it has to be installed at C:\ArcEmu Blizzlike

or it will not load.
ALOT of ppl just wun bother to look into my.cnf.

GG to ppl who said it MUST be installed at this particular directory or path. If some thing is hardcoded in a configuration file, it CAN be changed as long as you fix the links.

Ppl need to care less about playing and managing the servers as it's being passed down....releasers can't be your nanny everytime.

Good work Tso!

[RavenxVoid]

is anyone else having problems with flying mounts where you right click them but they dont show up?

[QQrofl]

Wow, I see your help.. all you want is the freaking rep of making this repack. Your not helping anyone at all....pointless post.

[Modder420]

Bump.

[mitch07]

Tso you rock, ive been waiting for a repack like this to come out and im glad its by somebody i can trust :) seriously how do you do it? lol every repack of yours ive downloaded so far is awesome. +rep

[Gabe]

all nice but with the site? pls can any1 post something about it :D

[yuniorvoltes]

Hi

bugs..
The hunter pets not work fine , not atack comand in de bars and feed pet spell not work.

somebody help please???

and wath is the command to add any item and how i make a full gm in my DB??

[aliexo]

search how to make costum items on this forums anywhere else im sure there are some guides

command for additems is ''.char additem <itemid>'' for this emu

[Kabukiblood]

search how to make costum items on this forums anywhere else im sure there are some guides

command for additems is ''.char additem <itemid>'' for this emu

.character additem 38082 (Example)

[aliexo]

hey tso.. i see u fixed the mobs attack but now i got a lil problem with ADE..

it says there is already a DB editor open but there is not... how can i solve this?

(alrdy tried restart my pc,to close any programs that are open but hidden)

[mattias9410]

is DK starter place spawned?

[arninho]

the repack is full of bugs :|

[seaburn]

Anyonw know how to get to northrend no zeppelins and i cant find worldport ids anywhere please help thx

[Modder420]

.recall port dalaran

[connor4333]

Tyvm =)

[seaburn]

.recall port dalaran

Wee thx finally i am there :-)

[Chrisd2k6]

Can u post SQL's for just the Spawning? like Northrend/Dalaran/DK Start and working Death Knight? Thanks.

[aliexo]

Can u post SQL's for just the Spawning? like Northrend/Dalaran/DK Start and working Death Knight? Thanks.

ehh that alrdy works in this repack?

[KryptoNEL]

I greet, have and eo a problem, have downlod Arcemu Blizzlike.EXE did the all customization started the shannon and world.exe and after 5-10 minutes appears me an error to shannon! Can me says and mia dc me and how can it solves? PLEASE HELP ME

http://img355.imageshack.us/img355/5074/88999820pr0.th.jpg (http://img355.imageshack.us/my.php?image=88999820pr0.jpg)
http://img511.imageshack.us/img511/3138/36678480qr0.th.jpg (http://img511.imageshack.us/my.php?image=36678480qr0.jpg)

[paris15]

Install net framework 3.5!

[tylerthe3]

can someone help me? i cant summon my goul.

[winkdog]

Hey,
I tried running ad.exe and it doesn't extract the maps, it gives an error about opening it and I have .net frame work. Can anyone upload it to Filebeam - Free Fast File Hosting (http://filebeam.com/) ? +rep if you do and give me link.

Here jtntime09 this one works Filebeam - Free Fast File Hosting (http://filebeam.com/download.php?file=b01d08dd1fd11e14b2d504b46f0708b7 ).

[Doom264]

http://i273.photobucket.com/albums/jj230/doom264/Errorrr.jpg

Keep getting this? any ideas and mysql isn't there...

[sycspysycspy]

Attack timer fixed, but chest has no loot. I remeber that your previous version 7 have chest loot.

http://i273.photobucket.com/albums/jj230/doom264/Errorrr.jpg

Keep getting this? any ideas and mysql isn't there...

dude check you file size if it is 69mb <- around
Your download is failed.

[winkdog]

Doom264 try downloading from the mirror link instead of the direct link. That happened to me to, and the one from the mirror link worked for me.

[Bugmenot]

Hey guys,

Im getting this problem when i load up world.exe

http://www.4freeimagehost.com/uploads/c2e6748d1670.jpg

Then immediately after that last error message, the exe window closes. This happens every time i load it up. Any suggestions?



So any suggestions?

[avngd7fld96]

Idk why I seem to be the only one with this problem, but when I try to open Logonserver.exe it says "This application failed to start because the config is wrong, reinstalling the application may fix this problem." and i didn't touch the configs. helppp!!

[hackah]

Idk why I seem to be the only one with this problem, but when I try to open Logonserver.exe it says "This application failed to start because the config is wrong, reinstalling the application may fix this problem." and i didn't touch the configs. helppp!!

You need to get .net framework 3.5

edit: here it is http://www.microsoft.com/downloads/details.aspx?FamilyID=ab99342f-5d1a-413d-8319-81da479ab0d7&displaylang=en

[winkdog]

So any suggestions?

Try running ArcEmu world as administrator.

[avngd7fld96]

thank you hackah. +rep =]

edit: im have troubles installing the .NET framework, it keeps initializing the transfer. any ideas?

edit2: nvm it transfered. thank you.

[mrmaple24]

where can I go to find the newest dbc?

[Tsoforever2]

You can look on faddix's post but atm this is the latest

[knightmarex]

very nice tso awesome repack :D +rep

[krazed]

are the DK starting quests working because the npc is missing the big eye thing does not work alot of quests for DK don't work but it is a very very good repack don't get me wrong just wondering if the DK quests worked???:confused:

[omegatanka]

Make sure everybody understands that WOTLK Arcemu is still extremely buggy and incomplete. Basically enjoy what's made so far and await the fixes in minutes, hours, days, weeks, and months to come.

I am pretty disappointed though that the Pre-Ascent Emulator teams from Aspire, Arcemu, mango's can't all come together.

[trunks94]

Is ships and zeppelins working?
Or how do i get into northrend?

[wowrogue007]

Vmap extractor if u need Vmaps 4 repack

download link

Filebeam - Free Fast File Hosting (http://filebeam.com/694c1990a37f544aa1893fb783c2262f)

this pogram is easyer to use then the normal extractor just 1 dubel click and u get ur Vmaps :)

[one80]

I'm running 3.0.3 patch 9183, but it says I dont have WOTLK installed?

[gamba88]

I'm running 3.0.3 patch 9183, but it says I dont have WOTLK installed?

open navicat and go to the accounts table..if u don't have wotlk but tbc patched to 3.0.3, change the "flags " to 8 instead of 32 ;)

[one80]

Thankyou, you're a genius :-D

[wowrogue007]

i going to make up soona web site and it will have 3 wow private servers in it 3 servers 3 dif repack i think this repack will be 1 of the 3 but the buggs needs to be fixed first we talking about www server no junk server what can take just 100 players i talking about server what takes up to 10000 players at same time :)

[gamba88]

i going to make up soona web site and it will have 3 wow private servers in it 3 servers 3 dif repack i think this repack will be 1 of the 3 but the buggs needs to be fixed first we talking about www server no junk server what can take just 100 players i talking about server what takes up to 10000 players at same time :)

if you go to C:\ArcEmu Blizzlike\ArcEmu\configs and you open arcemu-world, there will be a string called "player limit"..i think that if you change that number to 10000 there will be no problems imho

[Raistlin77]

Thanks for the vmaps extractor wowrogue007. Unfortunately it appears they have done nothing to fix the vmap_assembler program in this new version. I don't have a problem with running two files manually, my problem is just that vmap_assembler won't run and just keeps saying "exit with errors" immediately. I have net 3.5, cygwin, practically any special dlls it could possibly be using installed, so, I'm thinking it must just not like Intel quad core CPUs. I'll have to make sure my laptop is an AMD when I get it for the sake of running stuff like that I guess (actually I was planning to anyway, they're less expensive, I'm breaking with tradition by going Intel for desktop only because they're faster at the moment and my old machine was dying). At least I know what was causing the BSODs I mentioned in another post -- Nvidia really must not have checked the new 180.48 drivers very well before putting them out (it's like they pulled a pre-AMD-ATI on us). With 178.24 the problem's gone. Gauntlet Legends still locks up randomly in MAME, but other games like Ehrgeiz don't so, must just be a bug in the driver for that game. Anyway, this 9500 GT is just a placeholder card until I can afford one of the new ATI 4870 x2 cards, so it will be gone soon. Looks like my system is stable now.

Oh yeah, I noticed someone mentioned how net 3.5 keeps restarting the download. Unfortunately, that's normal, and as you may have noticed, it only looks like it's restarting, it acts like it's stuck on the same part once it gets halfway through the download as well. Their download status bar is just AFU, but hey, it's from MS, what would be odd is if it worked correctly. But at least it's only a cosmetic bug, you wait long enough it eventually does install correctly.

And yes, you should expect many bugs yet, it's still very early in the development process. Keep in mind the term "fully spawned" probably means something entirely different to NCDB than it does to you, for them it probably means something more along the lines of "no ghost towns, areas without mobs, etc." not "every NPC placed and functioning properly." Also keep in mind the focus is Northrend and Death Knights, so, expect other areas to suffer neglect. You could complain that the opera house in Kara still doesn't work, because it probably still doesn't, but that's not something they're even trying to do at the moment. In fact, that will probably not be implemented until the retro-gaming community gets around to doing emulators for old versions of WoW in the spirit of preservation (hopefully not by people affiliated with the MAME project -- you'll be waiting at least 20 years and need 40 cores to run it at full speed). There's nothing stopping you from checking out other databases like whydb though. Just create a new database and do an "execute batch" on the sql file/files. It's easy to change the config file back and forth, so, feel free to make comparisons and draw your own conclusion on what's best for you. NCDB may be considered the most advanced but that could change next week, besides, that doesn't mean it's the one that's going to work the best for your needs. Anyway, remember how long it took for them to get 2.4.3 running smoothly, it's going to be a while before they get all the bugs out, so be patient. I would not advise ditching your nearly completely functional 2.4.3 repack and 2.4.3 BC client anytime soon (the new stuff is fun but it's good to have something more playable to go back to). And remember, you're never going to get 100% because Blizzard puts out updates too quickly.

[tekkeryole]

i going to make up soona web site and it will have 3 wow private servers in it 3 servers 3 dif repack i think this repack will be 1 of the 3 but the buggs needs to be fixed first we talking about www server no junk server what can take just 100 players i talking about server what takes up to 10000 players at same time :)


Dude, for real, are you serious? Anybody can do that. And just because its a repack, doesnt mean it will have a crappy "junk" server ( if you are implying dyndns ) I run 4 realms on a custom set up PC, broadband, and I can support that much (10k players, IF i had the Ram, atm only a few thousand max), its all about your comp and connection when it comes to holding 10k players. Theres no edit that should be made anywhere except the config file if the requirements are met for sustaining that many players.

10k players would take close to what.....around 10 gigs of Ram(should prolly have a Quad Core also...) maybe get away with 6-8, but seeing as how Windows XP only allows you to utulize 3.5 gigs by default you should just buy a comp capable of this (screw paying for a server online, the money you invest in that could have been saved to buy your own *wink*).

[gamba88]

screw paying for a server online, the money you invest in that could have been saved to buy your own *wink*.

LOL and enough to play retail wow for at least 10 years :D

[Tsoforever2]

People please get on topic ... you want it closed again?

[gamba88]

People please get on topic ... you want it closed again?

sorry tso..anyway, i didn't tell you before but i'll do it now: very nice repack :P obviously + rep

[icefire1]

Can I make this server puplic or lan?

[aliexo]

Can I make this server puplic or lan?

yes its posseble to make it public. there are some guides for this around ac-web ;)

[Modder420]

Bump.

[greengohome]

Hey, I have a little problem. I get an error saying that I am authorized to play WotLK but my computer doesn't have the WotLK data. Well, I have WotLK 3.0.3. installed, and i also set my account flag to 32, but...still getting the error. Could you please help me?

P.S: This error comes out on any repack: arcemu, werewolf, ascent, mangos, etc.

[aliexo]

Hey, I have a little problem. I get an error saying that I am authorized to play WotLK but my computer doesn't have the WotLK data. Well, I have WotLK 3.0.3. installed, and i also set my account flag to 32, but...still getting the error. Could you please help me?

P.S: This error comes out on any repack: arcemu, werewolf, ascent, mangos, etc.

what is the error? SS plz

[zingrod]

hi there im downloading it now seems good if anyone has tryed it please pm me to tell me wat its like

[greengohome]

It is something like: "Your account is authorized to this expansion, but the computer you are playing on does not have the Wrath of the Lich King data. Please visit www.worldofwarcraft.com/lichking/download for support."
I don't know what's the problem, I have last version, I set flags to 32.... I just don't get it.

I searched Google (http://www.google.com) and I found many other people with the same problem but no help. I saw it also happened on the original server for some users, but that was on 3.0.1(BETA). Should I downgrade and reinstall it? Well, I tried this too, but it only downgraded to 3.0.1 and repatching didn't make any help. Do you know how to downgrade directly to 2.X.X when it used to work?

Please help me!

[chlee0902]

Name of NPCs in Sunstrider Isle seems to be bugged somehow. DB problem? Any solutions to this manner is appreciated.

[ava]

i cant get this repack public. all the configs are ryte all ports are open no firewall trouble nuthing but people cant connectO.o plox help

[wowrogue007]

the publising the server in to the net is the easyest part but to find a bug free working repack whats a cool repack is the hardest part

[qwerty]

When I try to zone into an instance in Northrend it says "intance not available" or something like that. Am I doing something wrong or do they not exist?

I tried .cheat triggerpass ;it didn't help in northrend.

Thanks

PS: Repack is great.

[ava]

well its supposed to be really easy but it just wont allow other to connect... i can connect from my comp ofc but it wont friggin go online its friggin annoying.... any suggestions any1`?

[samos255]

Nice going to rep

[Kabukiblood]

well its supposed to be really easy but it just wont allow other to connect... i can connect from my comp ofc but it wont friggin go online its friggin annoying.... any suggestions any1`?

Post your configs

[ava]

################################################## #####################
# ArcEmu Realms Configuration File
# Last updated at rev.1564
################################################## #####################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "icyserver.servegame.org"
Username = "root"
Password = "123"
Name = "characters"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "127.0.0.1"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "6666"
MaxBuild = "9999">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.s
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "ascent"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

[mrmaple24]

################################################## #####################
# ArcEmu Realms Configuration File
# Last updated at rev.1564
################################################## #####################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "icyserver.servegame.org"
Username = "root"
Password = "123"
Name = "characters"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "127.0.0.1"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "6666"
MaxBuild = "9999">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.s
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "ascent"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">


change your hostname to localhost
change your listen host to your dyndns

[ava]

################################################## #####################
# ArcEmu Realms Configuration File
# Last updated at revision rev.1564
################################################## #####################

#************************************************* *******************************
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. *
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#************************************************* *******************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "icyserver.servegame.org"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Blizzlike"
Address = "icyserver.servegame.org:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

[mrmaple24]

It is something like: "Your account is authorized to this expansion, but the computer you are playing on does not have the Wrath of the Lich King data. Please visit www.worldofwarcraft.com/lichking/download for support."
I don't know what's the problem, I have last version, I set flags to 32.... I just don't get it.

I searched Google (http://www.google.com) and I found many other people with the same problem but no help. I saw it also happened on the original server for some users, but that was on 3.0.1(BETA). Should I downgrade and reinstall it? Well, I tried this too, but it only downgraded to 3.0.1 and repatching didn't make any help. Do you know how to downgrade directly to 2.X.X when it used to work?

Please help me!

Install Burning Crusade from the WoW website and it should be on the 2.x.x patch

[ava]

################################################## #####################
# ArcEmu Configuration File
# Last Update: $Id: arcemu-world.conf rev.1564
################################################## #####################

#/************************************************** ******************************
# * How to use this config file: *
# * Config files are in a block->variable->setting format. *
# * A < signifies the opening of a block, the block name is expected after that. *
# * After the block name, a space and then the settings sperated by = / ' '. *
# * *
# * e.g. *
# * <block setting="0" someval = "1"> *
# * *
# * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
# * of the line, or in shell format (#). *
# ************************************************** ******************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
# Database.Host - The hostname that the database is located on
# Database.Username - The username used for the mysql connection
# Database.Password - The password used for the mysql connection
# Database.Name - The database name
# Database.Port - Port that MySQL listens on. Usually 3306.
# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "icyserver.servegame.org" Username = "root" Password = "123" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "icyserver.servegame.org" Username = "root" Password = "123" Name = "characters" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
# Host
# This is the address that the server will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# WorldServerPort
# This is the port that the world server listens on.
# It has to be the same as what is specified in the
# realms table in the LogonDatabase.
# Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "127.0.0.1"
WorldServerPort = "8129">

[mrmaple24]

################################################## #####################
# ArcEmu Realms Configuration File
# Last updated at revision rev.1564
################################################## #####################

#************************************************* *******************************
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. *
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#************************************************* *******************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "icyserver.servegame.org"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Blizzlike"
Address = "icyserver.servegame.org:8129"
Icon = "PVP"
Population = "1.0"
TimeZone = "1">


Your realm conf is fine.

################################################## #####################
# ArcEmu Configuration File
# Last Update: $Id: arcemu-world.conf rev.1564
################################################## #####################

#/************************************************** ******************************
# * How to use this config file: *
# * Config files are in a block->variable->setting format. *
# * A < signifies the opening of a block, the block name is expected after that. *
# * After the block name, a space and then the settings sperated by = / ' '. *
# * *
# * e.g. *
# * <block setting="0" someval = "1"> *
# * *
# * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
# * of the line, or in shell format (#). *
# ************************************************** ******************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
# Database.Host - The hostname that the database is located on
# Database.Username - The username used for the mysql connection
# Database.Password - The password used for the mysql connection
# Database.Name - The database name
# Database.Port - Port that MySQL listens on. Usually 3306.
# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "icyserver.servegame.org" Username = "root" Password = "123" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "icyserver.servegame.org" Username = "root" Password = "123" Name = "characters" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
# Host
# This is the address that the server will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# WorldServerPort
# This is the port that the world server listens on.
# It has to be the same as what is specified in the
# realms table in the LogonDatabase.
# Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "127.0.0.1"
WorldServerPort = "8129">


Change your world and logon database hostnames to localhost

[ava]

thx:)

[mrmaple24]

thx:)

No problem

[ava]

oh crap still dosent workO.o

[tylerthe3]

not takig away rep or pointing fingers, but the deathkight dosent fully work and some parts of northrend arnt fully spawned.

[mrmaple24]

oh crap still dosent workO.o

Whats the error that people r getting when trying to login to your server?

not takig away rep or pointing fingers, but the deathkight dosent fully work and some parts of northrend arnt fully spawned.

There is a separate forum for bugs, post them there.
projectnorthrend.ath.cx

[ava]

sum try again later error

[mrmaple24]

sum try again later error

Could you get a screenshot plz?

[ava]

couldnt u try to connect?:P

[mrmaple24]

couldnt u try to connect?:P

sure, meesage me the ip

[ava]

the realmlist is icyserver.servegame.org
il make ur username test and ur pass test:P

[mrmaple24]

the realmlist is icyserver.servegame.org
il make ur username test and ur pass test:P

I just tried and it won't let me. What ports are you forwarding?

[ava]

8787,3724,8085,80,8093,3306,8129,53240,8080

[Alisiendara]

no need for the first or second last one ava...

[ava]

those are for other stuffz:P

[antidoffa]

:P

eh m8?


you should have added an website for the server.. that would be great :D but the server fully works ^^


+rep

[Clow]

This works great ^^

//edit i rep'd you but i think there was something like "Rep from someone with less then 50 posts does not count."

[Doom264]

I finshed vmapextract_v2.exe and started vmap_assembler.exe and it just flashed and turned off? help?

[Kabukiblood]

Will TSO looks like someone else wants to take created for your work. Time to start the flamming.
http://www.ac-web.org/forum/releases/40718-epic-release-shadowcraft-repack.html#post328522

[Flashy_Senap]

This is probobly a stupid question, but do I need to have WOTLK installed on my computor, och can I just get the patches for TBC to 3.0.3 and still use the WOTLK features? Probobly a stupid question.

Another question, perheps related to my first stupid question. When I downloaded this repack and tried to get the maps by using AD.exe, a message appears, telling me: "The program couldn't start because of an error in the configuration. The issue can be corrected if you re-install the program." (translation by me.) I placed a map folder, and the AD.exe in the wow folder.

Could it be that my WOW is Eurpean, or what may cause this?

[Doom264]

yes u need wotlk and thats why maps a weird

[avngd7fld96]

When I try to start up ArcEmu-World.exe it says "ArcEmu-Optional.conf.. Unterminated block." and shuts down. Help?

[hackah]

When I try to start up ArcEmu-World.exe it says "ArcEmu-Optional.conf.. Unterminated block." and shuts down. Help?

change_me_login. you need to have same password in the logon and world config

[avngd7fld96]

change_me_login isnt in Optional though..

[hackah]

So...? Your point is....

[avngd7fld96]

When I start it up its saying the error is in Optional. ArcEmu-Optional shows up as red when it tries to load.

[Doom264]

http://i273.photobucket.com/albums/jj230/doom264/map.jpg
I keep getting this.. HELP!

[hackah]

When I start it up its saying the error is in Optional. ArcEmu-Optional shows up as red when it tries to load.

just try what i did first. and if it still doesnt work. post your world, logon, and optional configs

[avngd7fld96]

################################################## #####################
# ArcEmu Realms Configuration File
# Last updated at rev.1564
################################################## #####################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "characters"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "9183"
MaxBuild = "9183">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "change_me_logon"
AllowedIPs = "127.0.0.0/24"
AllowedModIPs = "127.0.0.0/24">

----------------------------------------------------------------

[avngd7fld96]

################################################## #####################
# ArcEmu Configuration File
# Last Update: $Id: arcemu-world.conf rev.1564
################################################## #####################

#/************************************************** ******************************
# * How to use this config file: *
# * Config files are in a block->variable->setting format. *
# * A < signifies the opening of a block, the block name is expected after that. *
# * After the block name, a space and then the settings sperated by = / ' '. *
# * *
# * e.g. *
# * <block setting="0" someval = "1"> *
# * *
# * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
# * of the line, or in shell format (#). *
# ************************************************** ******************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
# Database.Host - The hostname that the database is located on
# Database.Username - The username used for the mysql connection
# Database.Password - The password used for the mysql connection
# Database.Name - The database name
# Database.Port - Port that MySQL listens on. Usually 3306.
# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "world" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "localhost" Username = "root" Password = "ascent" Name = "characters" Port = "3306" Type = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
# Host
# This is the address that the server will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# WorldServerPort
# This is the port that the world server listens on.
# It has to be the same as what is specified in the
# realms table in the LogonDatabase.
# Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Listen Host = "0.0.0.0"
WorldServerPort = "8129">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
# Console Logging Level
# This directive controls how much output the server will
# display in it's console. Set to 0 for none, or -1 to disable.
# -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#
# World server packet logging feature
# If this directive is turned on, a file called `world.log`
# will be created in the server's directory and all packets
# sent and received by clients will be dumped here in bfg
# format.
# Default: 0
#
# DisableCrashdumpReport
# Disables crashdump reports, else if the build has debugging enabled,
# arcemu-world will call ./arcemu-crashreport every time it starts, so
# if there is a core, a crashdump will automatically be reported
# to the tracker at sf.net
# Needs gdb and curl
# Linux only
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogLevel Screen="0" File="-1" World="0" DisableCrashdumpReport="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Server Settings
#
# PlayerLimit
# This directive controls the amount of sessions that will be
# accepted by the server before it starts to add people to
# the server queue.
# Default: 100
#
# Motd
# This message will be displayed by the server in the chat
# box every time any user logs on. Colors can be used in the
# standard WoW format.
# Default: "No MOTD specified
#
# Send Stats On Join
# This directive controls whether the server will send the online player
# count to a cilent when it enters the world.
#
# Breathing Setup
# If the breathing code is causing problems or you want to run a fun server, you can disable
# water checks by enabling this directive.
# Default: 1
#
# Seperate Channels Control
# This directive controls whether horde and alliance chats will be seperated across channels.
# Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
# across channels.
# Default: 0
#
# Compression Threshold
# This directive controls the limit when update packets will be compressed using deflate.
# For lower-bandwidth servers use a lower value at the cost of cpu time.
# Default: 1000
#
# Queue Update Rate
# This directive controls how many milliseconds (ms) between the updates
# that the queued players receieve telling them their position in the queue.
# Default: 5000 (5 seconds).
#
# Kick AFK Players
# Time in milliseconds (ms) that a player will be kicked after they go afk.
# Default: 0 (disabled)
#
# Connection Timeout
# This directive specifies the amount of seconds that the client will be disconnected
# after if no ping packet is sent. It is advised to leave it at the default.
# Default: 180
#
# Realm Type
# This is the realm type that will be used by the server to handle world pvp.
# Default: 0 (pve)(RPPVE)
# Other values: 1(pvp)(RPPVP)
#
# AdjustPriority
# Set the server to high process priority?
# Default: 0
#
# RequireAllSignatures
# This directive controls whether the full 10 signatures will be required in order
# to turn in a petition. Smaller servers would be better off having it turned off.
# Default: off
#
# ShowGMInWhoList
# This directive controls whether GM's will be shown in player's who lists or not.
# Default: on
#
# MapUnloadTime
# This directive controls whether to unload map cells after an idle period of <x> seconds.
# Use on smaller servers or servers that are memory-limited. The server without cell unloading
# can use over 1.2GB memory with all creatures loaded.
# Default: 0
#
# LimitedNames
# This directive forces all character names to be a-z and A-Z compliant.
# Default: 1
#
# UseAccountData
# This directive determines whether the account_data table is used to save custom client data.
# May cause buggy behaviour.
# Default: 0
#
# AllowPlayerCommands
# This directive, if enabled can allow players to use commands with a '0' command group.
# Default: 0
#
# EnableLFGJoin
# If this is enabled, you can join the LFG channel without using the LFG tool.
# Default: 0
#
# TimeZone
# Set your local timezone relative to GMT here.
# Default: 0
#
# Collision
# Enable collision system (LoS checks).
# Default: 0
# Make sure you have collision.dll in the same folder as arcemu-world!
#
# DisableFearMovement (In Battlegrounds and Arenas only!)
# Disable fear movement in arenas & battlegrounds.
# Recommended if you do not have collision enabled!
# Default: 0 (off) Not blizzlike
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Server PlayerLimit = "100"
Motd = "Welcome to Oblivion World of Warcraft. Testers only."
SendStatsOnJoin = "1"
EnableBreathing = "1"
SeperateChatChannels = "0"
CompressionThreshold = "1000"
QueueUpdateInterval = "5000"
KickAFKPlayers = "0"
ConnectionTimeout = "180"
RealmType = "1"
AdjustPriority = "0"
RequireAllSignatures = "0"
ShowGMInWhoList = "1"
MapUnloadTime="0"
LimitedNames="1"
UseAccountData="0"
AllowPlayerCommands="0"
EnableLFGJoin="0"
TimeZone="0"
Collision="0"
DisableFearMovement="0">

[avngd7fld96]

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Periods HonorUpdate="daily"
ArenaUpdate="weekly"
DailyUpdate="daily">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Channels Setup
#
# These directives control some of the aspects in the channel system.
#
# BannedChannels
# If you would like to ban users from creating or joining a channel specify them here in a ';'
# seperated list.
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Channels BannedChannels="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# VoiceChat Setup
#
# These directives control some of the aspects in the voice chat system.
#
# Enabled
# If you want to enable the voice chat system, this must be set to 1.
# Default: "0"
#
# ServerIP
# This is the IP of the voice chat server.
# Default: "127.0.0.1"
#
# ServerPort
# This is the TCP port of the voice chat server.
# Default: "3727"
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<VoiceChat Enabled="0"
ServerIP="127.0.0.1"
ServerPort="3727">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Remote Console Setup
#
# These directives control the remote administration console.
#
# Enabled
# If you want to enable the remote administration console, set this.
# Default: 0
#
# Host
# This is the interface the RA server listens on.
# Default: "0.0.0.0"
#
# Port
# This is the TCP port the RA server listens on. Connect to it with a regular telnet client.
# Default: 8092
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<RemoteConsole Enabled="0"
Host="0.0.0.0"
Port="8092">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Scripting Engine Setup
#
# ArcEmu can support multiple script backends via the means of loading .dll files for them.
# This section in the config can enable/disable those backends.
#
# LUA
# If you would like to enable the LUA scripting backend, enable this.
# Default: 0

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Announce Configuration
#
# Tag
# Configure what is shown in front of your announces in the [] brackets.
# Default: Staff (would give [Staff])
#
# GMAdminTag
# Configure whether the <GM> or <Admin> tag is shown in announces.
# Default: 0 (disabled)
#
# NameinAnnounce
# If this is enabled the name of the person who makes an announcement will be shown in front of the msg.
# Default: 1 (enabled)
#
# NameinWAnnounce
# If this is enabled the name of the person who makes an wide-screen announcement will be shown in front
# of the message.
# Default: 1 (enabled)
#
# ShowInConsole
# This controls whether announces are shown in the arcemu-world console or not.
# This does not apply for the team-internal GM announce.
# Default: 1 (enabled)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Announce Tag = "Staff"
GMAdminTag = "0"
NameinAnnounce = "1"
NameinWAnnounce = "1"
ShowInConsole = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Power regeneration multiplier setup
#
# These directives set up the multiplier in which regen values will be
# multiplied by every 2 seconds.
# Powers:
# Power1 = Mana, Power2 = Rage, Power3 = Energy
#
# Reputation:
# Kill = Rep gained on kill, Quest = rep gained from quests
#
# Honor:
# Honor = multiplier used to calculate honor per-kill.
#
# PvP:
# PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
# ArenaQueueDiff = maximum difference in average rating of 2 arena teams to be matched in queue
#
# XP:
# The xp that a player receives from killing a creature will be multiplied
# by this value in order to get his xp gain.
#
# RestXP:
# Amount of hours needed to get one Bubble rested XP ( one bubble is 5% of the complete XP bar)
# Default is 8 hrs rest for one bubble. Raising this rate causes RestedXP to be earned faster,
# F.e, setting a rate of 2 makes you require only 4 hrs reesting for 1 bubble (instead of 8).
# Note that resting in a resting area (Zzz) goes 4 times faster.
# Default: 1 (bubble every 8 hrs)
#
# Drop(Color):
# These values will be multiplied by the drop percentages of the items for creatures
# to determine which items to drop. All default to 1.
# To allow you better control of drops, separate multipliers have been created for items
# of each quality group.
#
# DropMoney:
# This value will be multiplied by any gold looted and pickpocketed
#
# Save:
# Value in milliseconds (ms) that will be between player autosaves.
# Default: 300000 (5 minutes)
#
# SkillChance:
# The chance that you have to level up a skill in melee or a profession is multiplied
# by this value.
# Default: 1
#
# SkillRate:
# The amount of "levels" your skill goes up each time you gain a level is multiplied
# by this value.
#
# ArenaMultiplier
# Every week/day the arena points gained by a player will be multiplied by this value.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Rates Health="1"
Power1="1"
Power2="1"
Power3="1"
QuestReputation="1"
KillReputation="1"
Honor="1"
PvPTimer="300000"
ArenaQueueDiff="150"
Compression="1"
XP="1"
QuestXP="1"
RestXP="1"
ExploreXP="1"
DropGrey="1"
DropWhite="1"
DropGreen="1"
DropBlue="1"
DropPurple="1"
DropOrange="1"
DropArtifact="1"
DropMoney="1"
Save="300000"
SkillChance="1"
SkillRate="1"
ArenaMultiplier2x="1"
ArenaMultiplier3x="1"
ArenaMultiplier5x="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
# This should be set to 'gm_sync_channel' for the My_Master addon to work.
# Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GMClient GmClientChannel = "gm_sync_channel">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain & Collision Settings
#
# Set the path to the map_xx.bin files and whether unloading should be enabled
# for the main world maps here. Unloading the main world maps when they go idle
# can save a great amount of memory if the cells aren't being activated/idled
# often. Instance/Non-main maps will not be unloaded ever.
#
# Default:
# MapPath = "maps"
# vMapPath = "vmaps"
# UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Terrain MapPath = "maps"
vMapPath = "vmaps"
UnloadMaps = "1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
#
# Cheaters:
# This directive sets up the cheater logging file, if turned on any
# cheat / packet exploit / speedhack attempts will be logged here.
#
# GMCommands:
# These two directives set up the GM command logging fie. If turned on,
# most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Log Cheaters="0" GMCommands="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
# These directives control the limits and behaviour of the ingame mail system.
# All options must have Mail prefixed before them.
#
#

[avngd7fld96]

ReloadDelay
# Controls the delay at which the database is "refreshed". Use it if you're
# inserting mail from an external source, such as a web-based interface.
# 0 turns it off.
# Default: 0
#
# DisablePostageCostsForGM
# Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
# Default: 1
#
# DisablePostageCosts
# Disables postage costs for all players.
# Default: 0
#
# DisablePostageDelayItems
# Disables the one hour wait time when sending mail with items attached.
# Default: 1
#
# DisableMessageExpiry
# Turns off the 30 day / 3 day after read message expiry time.
# WARNING: A mailbox still cannot show more than 50 items at once
# (stupid limitation in client).
# Default: 0
#
# EnableInterfactionMail
# Removes the faction limitation for sending mail messages. Applies to all players.
# Default: 1
#
# EnableInterfactionMailForGM
# Removes the faction limitation for sending mail messages, but only applies
# to GM's. EnableInterfactionMail overrides this.
# Default: 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Mail ReloadDelay="0"
DisablePostageCostsForGM="1"
DisablePostageCosts="0"
DisablePostageDelayItems="1"
DisableMessageExpiry="0"
EnableInterfactionMail="1"
EnableInterfactionMailForGM="1">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
# These directives set up the status dumper plugin. Filename is an
# absolute or relative path to the server binary. Interval is the
# time that the stats will be dumped to xml.
# Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<StatDumper FileName = "stats.xml" Interval = "120000">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
# Preloading
# This directive controls whether the entire world will be spawned at server
# startup or on demand. It is advised to leave it disabled unless you are a
# developer doing testing.
# Default: off
#
# Background Loot Loading
# This directive controls whether loot will be loaded progressively during
# startup or in the background in a seperate thread. Turning it on will
# result in much faster startup times.
# Default: on
#
# Multithreaded Startup
# This controls whether the server will spawn multiple worker threads to
# use for loading the database and starting the server. Turning it on
# increases the speed at which it starts up for each additional cpu in your
# computer.
# Default: on
#
# Additional Table Binding
# You can load static item/creature/etc data into the server using this directive.
# This way throughout database updates your custom data can be preserved.
# Format: "sourcetable destination table,sourcetable destinationtable"
# Example: "myitems items,mynpcs creature_names"
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Startup Preloading = "1"
BackgroundLootLoading = "1"
EnableMultithreadedLoading = "1"
LoadAdditionalTables="">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Flood Protection Setup
#
# Lines
# This is the number of "messages" or lines that it will allow before stopping messages from
# being sent. This counter is reset every "Seconds" seconds.
# Default: 0 (disabled)
#
# Seconds
# This is the number of seconds inbetween the Line counter being reset.
# Default: 0 (disabled)
#
# SendMessage
# If this is enabled, a "Your message has triggered serverside flood protection. You can speak again in %u seconds."
# message will be sent upon flood triggering.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<FloodProtection Lines = "0" Seconds = "0" SendMessage = "0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
# DisablePings
# This directive controls whether pings will be sent to the logonserver to check
# if the connection is still "alive". Expect problems if it is disabled.
# Default: 0
#
# RemotePassword
# This directive controls the password used to authenticate with the logonserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer DisablePings = "0"
RemotePassword = "change_me_logon">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# AntiHack Setup
#
# Teleport
# This directive controls anti-teleport hack checks will be enabled or not.
# Default: 1
#
# Speed
# This directive controls anti-speed hack checks will be performed on player movement or not.
# Default: 1
#
# SpeedThreshold
# This directive controls the threshold at which the speedhack detection will trip.
# It's (characters' move time of distance - real move time of distance)
# Default: -600.0
#
# FallDamage
# This directive controls anti-fall damage hack checks will be performed on player movement or not.
# Default: 1
#
# Flying
# This directive controls whether flight hacks will be performed on players or not.
# Default: 1
#
# FlightThreshold
# This directive controls the height at which you must be above the vmaps height before you are flagged as "flying" and are subject to kicks.
# Default: 10
#
# DisableOnGM
# This directive controls hack checks will be disabled for GM's or not.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<AntiHack Teleport="1"
Speed="1"
FallDamage="1"
Flight="1"
FlightThreshold="10"
DisableOnGM="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Period Setup
#
# These are the periods that the server will wait before doing periodic duties. At the moment only
# arena point calculation and honor point calculation are used here.
#
# Default:
# Arena: weekly
# Honor: daily

[avngd7fld96]

# (blizzlike values)
#
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<ScriptBackends LUA="0"
AS="0">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Movement Setup
#
# NOTE: For any of these directives to function, movement compression has to be compiled into
# the server.
#
# FlushInterval
# This is the interval at which movement packets will be flushed to the client, i.e. compressed/sent.
# If you have a high threshold, keeping this at 1-2 seconds will work better.
# Default: 1000 (one second)
#
# CompressionRate
# This is the deflate compression rate. Higher will use more cpu, but smaller packets.
# Range: 1-9 (or 0 is disable)
# Default: 1
#
# CompressionThreshold
# This is the distance that will be used to determine if an object needs to be sent compressed or
# normal. It is advised to keep it at least 30 units. This value is used for players.
# Default: 30.0
#
# CompressionThresholdCreatures
# This is the distance that will be used to determine if an object needs to be sent compressed or
# normal. This value is used for creatures, so it can be a lot lower.
# Default: 10.0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Movement FlushInterval="1000"
CompressRate="1"
CompressThreshold="30.0"
CompressThresholdCreatures="10.0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Localization Setup
#
# LocaleBindings
# This is a list of locale names and the other locale you want to associate with them.
# For example, to make the European client always use the french language, "enGB=frFR"
#
# Must be terminated by a space.
#
# Default: ""
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Localization LocaleBindings="">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Dungeon / Instance Setup
#
# TakeGroupLeaderID
# If a player doesn't have an instance id, the group isn't already assigned
# to an instance and the group or raid leader already have one, the player will
# be bound to the instance id of the group/raid leader.
# Default: 1 (enabled)
#
# SlidingExpiration
# If enabled, persistent instances will expire relative to the creation time.
# Otherwise persistent instances will expire at fixed points of time. (blizz like)
# Default: 0 (disabled)
#
# DailyHeroicInstanceResetHour
# Sets the hour of day when heroic instances will be resetted on disabled SlidingExpiration.
# Default: 5
#
# CheckTriggerPrerequsites
# Entering & checks
# Default: 1
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<InstanceHandling TakeGroupLeaderID="1"
SlidingExpiration="0"
DailyHeroicInstanceResetHour="5"
CheckTriggerPrerequsites="1" >


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# BattleGround settings
# Set Rules for Min / Max players ---- PS.Min for each side | Max for Total
#
# AlteracValley
# AV_MIN
# AV_MAX
#
# ArathiBasin
# AB_MIN
# AB_MAX
#
# WarSong
# WS_MIN
# WS_MAX
#
# Eyes Of The Storm.
# EOS_MIN
# EOS_MAX
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Battleground AV_MIN="0"
AV_MAX="40"
AB_MIN="0"
AB_MAX="15"
EOS_MIN="0"
EOS_MAX="15"
WS_MIN="0"
WS_MAX="10" >
--------------------------------------------

################################################## #########################
# ArcEmu Optional Configuration File
# Last Update: $Id: arcemu-optional.conf rev.1663
#
# This configuration file contains all non-blizzlike values.
################################################## #########################

#/************************************************** ******************************
# * How to use this config file: *
# * Config files are in a block->variable->setting format. *
# * A < signifies the opening of a block, the block name is expected after that. *
# * After the block name, a space and then the settings sperated by = / ' '. *
# * *
# * e.g. *
# * <block setting="0" someval = "1"> *
# * *
# * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
# * of the line, or in shell format (#). *
# ************************************************** ******************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Optional Settings
#
# Starting Level
# This controls at which level characters are created. Range is from 1-80.
# Default: 1
#
# Level Cap
# This variable controls the level that stats will be generated up to internally.
# Beyond this level players can still see a higher level visually but their stats won't
# increase beyond this point.
# Default: 80
#
# Generated Level Level Cap
# This variable controls the level at which stats will generate up to. Generally the formulas go
# crazy after level 80 so this way you can keep the high visual but stats at a reasonable value.
# Default: 80
#

[avngd7fld96]

# Allow The Burning Crusade characters
# This will override account settings, so you can disable TBC from your server without having to mess with accounts.
# Default: 1
#
# CustomCharterGiver(EntryID)
# For registeration of custom script.
#
# AdditionalFun
# it's verbose.
# Default: 0 (disabled)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Optional StartingLevel="1"
LevelCap="80"
GenLevelCap="80"
AllowTBC="1"
AntiMasterLootNinja="0"
CustomCharterGiver="0"
AdditionalFun="0" >

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Interfaction Options
#
# InterfactionChat
# This directive controls whether horde and alliance players can talk to each other.
# Default: 0 (disabled)
#
# InterfactionGroup
# This directive controls whether horde and alliance players are able to build a group together.
# Default: 0 (disabled)
#
# InterfactionGuild
# This directive controls whether horde and alliance players are able to build crossfaction guilds
# Default: 0 (disabled)
#
# InterfactionTrade
# This directive controls whether horde and alliance players can trade with each other.
# Default: 0 (disabled)
#
# InterfactionFriends
# If this is enabled players can add other players from the opposite faction to their friends list
# Default: 0 (disabled)
#
# InterfactionMisc
# This directive controls whether horde and alliance players are able to use different functions
# on players of the opposite faction. This includes e.g. using the /who command.
# Default: 0 (disabled)
#
# CrossOverCharacters
# If this is enabled players are able to create both, horde and alliance characters on a PVP realm.
# Default: 0 (disabled)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Interfaction InterfactionChat="0"
InterfactionGroup="0"
InterfactionGuild="0"
InterfactionTrade="0"
InterfactionFriends="0"
InterfactionMisc="0"
CrossOverCharacters="0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Color Configuration
#
# AnnTagColor
# This controls which color the [] tag in front of announces has.
# Default: 2 (Light Blue)
#
# AnnGMTagColor
# This controls the color of the GM/Admin tag in announces. Only enabled if GMAdminTag is set to 1.
# Default: 1 (Light red)
#
# AnnNameColor
# This controls the color of the gamemaster's name in announces.
# Default: 4 (Green)
#
# AnnMsgColor
# This controls the color of message in announces.
# Default: 6 (Gold)
#
#
# You can choose one of the colors below.
# LightRed = 1
# LightBlue = 2
# Blue = 3
# Green = 4
# Red = 5
# Gold = 6
# Grey = 7
# White = 8
# Magenta = 9
# Yellow = 10
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Color AnnTagColor = "2"
AnnGMTagColor = "1"
AnnNameColor = "4"
AnnMsgColor = "6">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Extra Scripts Configuration
#
# Instant80
# Enables Instant80 mode.
#
# PvPToken
# This directive enables item rewards when there is a PvP Kill and players are level 70
#
# PvPTokenID
# If PvPToken is enabled, specify the item ID of your custom Token ID, or any other item
#
# L70etc
# Enables L70etc Band Gossip script.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Extra Instant80="0"
PvPToken="0"
PvPTokenID="13905"
PvPKillAnnounce="0"
Portals="0"
L70etc="0"
WeddingNPC="0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GameMaster Configuration
#
# ListOnlyActiveGMs
# List only gamemasters with enabled GMFlag to players without any permissions.
# Default: 0
#
# HidePermissions
# Hides permission flags from players without any permissions.
# Default:0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GameMaster ListOnlyActiveGMs = "0"
HidePermissions = "0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Common Schedule Configuration (func from commonschedulethread.cpp p2wow's core)
#
# AutoBroadCast (MultiLanguages supported)
# Enable/Disable new broadcast system.(cebernic: blizzlike )
# Default: 0(Disable) 1(Enable)
#
# BroadCastInterval
# Contents sending on interval by second
# Default:(Min:10 Max:1440)
#
# BroadCastTriggerPercentCap
# Setup the cap of chance in condition with contents sending in each BroadCastInterval's value
# Notice: OP can setup any of message's priority, this could be adjustment in field `percent` of table `worldbroadcast`
# Default:99 (min:1 max:99, 99 only displaying message on priority 100 set.)
# i.e : If set 50 ,it means all of messages 100% selected(but may not displayed) by higher than '50' priority with each broadcastinterval.
# The total selected messages(>51 priority) chosen at random with send to all players.
#
# BroadCastOrderMode [0-1]
# 0:RandomMode - By Triggering & Conditions
# 1:SerialMode - [ignored both ->field `percent` from table `worldbroadcast` & TriggerPercentCap parameters.]
# Default:0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<CommonSchedule AutoBroadCast = "1"
BroadCastInterval = "10"
BroadCastTriggerPercentCap = "2"
BroadCastOrderMode = "0">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#Extra Class Configurations
# DeathKnightPreReq
# Enable/Disable requirement to have a level 55 character on your account before allowing creation
# Of a Death Knight hero class.
# 1 = level 55
# 0 = Any level
#
# DeathKnightLimit
# Enable/Disable limit to have a more than one Death Knight Hero Class per realm.
# 1 = Enabled (Only one Death Knight per realm)
# 0 = Disabled (You can create a 10 DK per realm)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<ClassOptions DeathKnightPreReq = "1"
DeathKnightLimit = "1" >

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GoldSettings Configuration
#
# EnableGoldCap
# Enable/Disable Maximum Gold.
# Default: 0(Disable) 1(Enable)
#
# StartingGold
# On Creating a character they will start with this amount in Gold
# Default: 0
#
# MaximumGold
# Maximum amount of Gold a character can hold
# Default: 214748 (214k gold)
# Note: Client Max is 214748 Gold (2^31, signed int32)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<GoldSettings EnableGoldCap = "0"
StartingGold = "0"
MaximumGold = "214748">
--------------------------------------------






Do your best Hackah. I wish you luck, all three configs, in order with logon first, world second, optional third.:D

[Kabukiblood]

Your Realm.Config is not in here.

[Kabukiblood]

################################################## #####################
# ArcEmu Realms Configuration File
# Last updated at rev.1564
################################################## #####################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "characters"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.3 was build 9183.
#

<Client MinBuild = "9183"
MaxBuild = "9183">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "change_me_logon"
AllowedIPs = "127.0.0.0/24"
AllowedModIPs = "127.0.0.0/24">

----------------------------------------------------------------

Ok I have posted my config files all you need to do is change the realm to fit your needs. Also when you make your realm public do not use your dns use your external ip address. Go to What Is My IP Address? - IP Address Lookup, Internet Speed Test, IP Info, plus more (http://www.whatismyip.com) if you do not know what it is.

P.S. This is a rar archive so you need to change the configs.zip to configs.rar or you will not be able to extract it.

[manguerola]

cant pvp any idea???

[BladeDark]

Problems-

1. The portal in Archeus to change floors dosent work.
2. A few instances come up as instance unavailable.
3. NO way off of Archeus.

thats all I got so far

[Kabukiblood]

Go here you will find all of the bugs.

Project Northrend Repack Service! &bull; View active topics (http://projectnorthrend.ath.cx/search.php?search_id=active_topics)

[top]

hello anyone need download maps 3.0.3
download here
Upload-Drive : Free File Hosting (http://www.upload-drive.com/5260/maps_rar)

[mikeywow14]

Tso .. .where is your other uhm ... thread? to get onto your server.
Ive tried and given up on makin my own cuz i can never get it to work :(
Plz msg me how to get onto ur realm ^_^

[gamba88]

http://i273.photobucket.com/albums/jj230/doom264/map.jpg
I keep getting this.. HELP!

i had this problem too...i tried this
http://www.ac-web.org/forum/releases/40271-working-wotlk-extractors-vmap-too.html

and it worked perfectly.

[BladeDark]

Problems-

1. The portal in Archeus to change floors dosent work.
2. A few instances come up as instance unavailable.
3. NO way off of Archeus.

thats all I got so far

4. Deathknight Runic power dosent increase
5.a few abilities are broken

[KryptoNEL]

Eror pet not work atack http://img124.imageshack.us/img124/3193/22894839eh1.th.jpg (http://img124.imageshack.us/my.php?image=22894839eh1.jpg)

[gamba88]

Fully Spawned 3.0.3!

Please if you find any bugs, To post them on THIS (http://projectnorthrend.ath.cx/) forum.


:D

[Raistlin77]

Yeah, that version of vmap_assembler failed also, so, I'm going to try re-installing .NET 3.5 on the off chance Threatfire managed to mess it up (very unlikely as the server itself works, and probably wouldn't if it had). It seems that Doom264 is having the same problem I am with vmap_assembler. I'm wondering, do you also have an Intel Quad Core? If so is it a 9550 like mine or something else?

One thing I noticed is that the buildings folder was nearly 100 MB smaller this time. So I guess I need to rerun that in a command window just to make sure there were no errors.

UPDATE: Never mind, error between chair and keyboard, lol. It was running on the wrong WoW folder and I hadn't noticed the app actually selects the last copy of the game you played -- the dangers of keeping multiple copies of WoW around, lol. Anyway, it worked this time.

[Schwartz001]

I appreciate all the work in putting these packs together, but they are still not as finished as the latest mangos/hybrid build (specifically toward the DK stuff) that I have had for a few weeks now. It is almost there with this last release (fixing the cubes etc).

The biggest difference is the DK stuff.

The mangos hybrid build has working runic power, work arounds for the starting DK quests, the teleporter to the 2nd level and trainers works, and you can even fly down and get a horse mount quest for the DK (with a few other quests).

I only bring this up as a possible thing for you to look at to atleast get the next version to that point (with regard to the DK stuff, the rest of the world seems to be as good as, if not better than the mangos hybrid build as of now). Again, I do appreciate all your hard work, your knowledge of this stuff is far greater than mine lol (I only started messing with this EMU stuff when wotlk came out).

Here are some other bugs that are common in almost every build I have messed with:

-- Mining says you have no pick even if you do (same with blacksmithing I believe)
-- Enchanting doesn't let you go passed 400 in skill (you can train grand master, but when you train the next available skill, it pops back up as if you hadn't trained it)
-- Still quite a few missing items. The ones that are the most obvious are off of wowhead, if you sort by best/highest level. The graphic for them is there, but they either show up as just "ITEM" or as the correct name, without most (some all) of the correct stats.
-- Lots of class specific skills that are regular skills/spells don't work, for example, overpower doesn't pop up when a mob dodges.
-- Some of the mobs in dalaran city attack you

There are quite a bit more bugs... I am just bored at work right now without any access to a wow server, and am unable to post these bugs on your other forum (for some reason this is the only wow related web site that my work doesn't block).

[wowrogue007]

USE THIS ONE IF UR VMAP EXTRACTOR DOES NOT WORK .....

this vmaps extractor works . 100% tested


Download link

Filebeam - Free Fast File Hosting (http://filebeam.com/694c1990a37f544aa1893fb783c2262f)

[Raistlin77]

I got the last one working, seems to work well once you have it using the right WoW folder. Now to check this out. Hmm, maybe I should give Mangos a second chance, but the last time it left me with a server select loop. It was a Mangos Amber repack so it should have been pre-functioning. I tried switching the IP address from localhost, to my NAT address, to my DynDNS address, but nothing worked. So, assuming I could get logged on to test it this time, I might be able to make a fair comparison between it and ArcEmu. For 2.4.3 ArcEmu ended up winning by default because it was the one that worked.

[greengohome]

Hey again! I think I managed to fix my problems. For all the others who prefer taking the patches from random sites instead of using the Blizzard Downloader I will tell you what happened to me.
I got bored of the Blizzard downloader and took the patches from Strategy Informer: Feeding your games addiction (http://www.strategyinformer.com) . My WoW seemed to work until I tried to get on a server. It would always tell me: "Your account is authorized for the WotLK expansion but the computer you are playing on does not have WotLK data...."
What was I supposed to do?
Well, I searched for help everywhere; no luck.
I tried to downgrade it. It got to version 3.0.1 . I repatched it. The same problem occurred.
I tried to downgrade it to 2.4.3 . Then, it completely crashed. Nothing worked anymore so I had to uninstall the game. Now, I have to spend hours downloading the game again. Anyway, I chose the hard way: Blizzard Downloader. It is really boring and annoying, but I am damn sure this is going to work.
Just as an example: A Blizzard patch is 100MB. If you download 99.5MB patch, then the game is not going to work for sure.
So, I DO recommend everyone to use Blizzard Downloader.

The good part is that now I have more spare time to work with you :D. Even if I don't seem to help, I am working hard and won't post it until it's good. I won't post a new repack, only suggestions for your repack, because it's really great.

The only thing I could ask you, Tso, is to upload the repack including the working maps and vmaps + extractors + the good config files. I wish you found time to upload all in the same pack and post the link in this thread, nowhere else.
If you need any help for the Sql part, just ask me. Sql is my favourite job!



I would be very grateful if you accepted me to work with you at a server.

[Raistlin77]

Yes, use the Blizzard download installer to install Lich King and you wouldn't even have had to grab so many patches in the first place, the install it downloads puts you to 3.0.2 automatically. Of course, I recommend doing this to a COPY of your 2.4.3 as you will probably want to keep it. What can I say, this is what I remember NCDB being like alright. I thought surely they had improved since that deliberately outdated version in the Panex public repack. Well, some creatures have spells, but, still, most doors don't work, many of the same enemies are STILL unattackable, and they even seem to have forgotten to spawn Thrall just like before, lol. Oh yeah, great recall port to Dalaran ... assuming you like falling 30 feet from mid-air. Fortunately God Mode works against falling, but it doesn't against enemies? I'm putting the new whydb to this, it may not have a fully spawned Northrend, but at least the rest of the game should play better.

[mikeywow14]

Ok ...so, i downloaded Tso's repack ... andi got it extracted to C:/ and i got the Mysql and apache to run. But when i tried running the logonserver ... it gave me a message saying .... the application failed to start due to configuration problems ... any ideas? :( im a noob ..help me out :)

[samos255]

Flammers...
Try to make your own wotlk repack and then flame that repack guys.
Nice Poison!

[Kabukiblood]

Ok 2 things.
1. The projectnorthrend site is down.
2. When is V9 coming out?

[Bugmenot]

Try running ArcEmu world as administrator.

it did not work..sry

[Kyoshiro]

Nice Work

[aliexo]

tso.. when will v9 be out?

prob not long anymore?

[one80]

I can't seem to port anywhere in Northrend - it crashes and says it had an error loading northrend.wdt. Is this because I'm using TBC patched to 3.0.3? How can I fix it?

[slaygod]

I have the same problem as mikeywow14 and dont know how to fix it... plz need help

[aaamrapoc]

Anyone else having probs with spawning portals in cities and them staying when restarting server? Seems they will not stay when using the 1 at the end of the code. Comes up on the arc-emu world saying in short terms: failed due to error in syntax [replace into game object spawns]


EDIT.......
NEVERMIND. I increased the numbersize in the spawns sql and it took the portal codes........ DUH APOC.......
Anyway Good job TSO. Damn good pack.

[Sanders]

Is this the final release? Still trying to build a funserver repack but kind of hard to do when your never sure if the final release is out yet

[Raistlin77]

Well, if that was directed at me Samos255, you'll notice, I did not say any of my problems were with Tso's repack. They're all with NCDB. See, the thing is, they may have Northrend done the best so far, but whydb has the rest of the game implemented better. Tso, if there's any chance you could get me an SQL of just the Northrend part of the NCDB database, I think I could make a hybrid and we could have the best of both DBs. I'll upload it and you can put it in your repack if you want to.

[Sanders]

Anyone going to answer me?

and Raistlin, who cares NCDB is the best (I think xD)
Just import your own Northrend creature_spawns/creature_names

[mrjoker123]

ye erm, im having some problems with the map assembler?? I done the map extractor and then it goes into a *building* folder? then i click the assembler then nothing happens? any ideas. Also when i try to connect my SQL it says i cannot connect to localhost(31) I think or sum sh1t

[th3k1d]

hi i would like to ask where i can find the id's for the item and the spells.
i cant find them anywhere

[maam10]

Do i got to have VMaps for the server to work, or is it optional?

[P1raten]

Do i got to have VMaps for the server to work, or is it optional?
vmaps is not needed.

[Kabukiblood]

TsoForever2 why don't you and rrtn get together pool your resources and DB and release a bomb a$$ repack?

[tanguy104]

How do you add items. It isn't .additem ~~~~~ anymore.

[Kabukiblood]

How do you add items. It isn't .additem ~~~~~ anymore.

.character additem (Item ID)

[Lasine2]

Mirror Is "ALOT" FASTER! HERE (http://www.mediafire.com/?3irgmg1zyzm)


My Servers Site (http://www.wow-fantacy.page.tl)

[camfritz117]

whenever i try to star arcemu-logonserver or arcemu-world it says
:This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. And i have reinstalled the whole repack and stuff and it still does the same thing anyone know how to fix this? any help would be appreciated

[Kabukiblood]

whenever i try to star arcemu-logonserver or arcemu-world it says
:This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. And i have reinstalled the whole repack and stuff and it still does the same thing anyone know how to fix this? any help would be appreciated

It has to be installed in your C:/ ABSOLUTLY NO WHERE ELSE.

[tanguy104]

Amazing Repack Tso!

[camfritz117]

It has to be installed in your C:/ ABSOLUTLY NO WHERE ELSE.

it is installed in my C: drive

[nicdude]

whenever i try to star arcemu-logonserver or arcemu-world it says
:This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. And i have reinstalled the whole repack and stuff and it still does the same thing anyone know how to fix this? any help would be appreciated

You need to install .Net Framework 3.5 If you can't uninstall it PM me and I'll give you a fix for that.

[Raistlin77]

camfritz117, you do have .net 3.5 installed right? Because that's about all I can think of, it works fine for everyone else. Argh, someone beat me to it, oh well.

Sanders, guess you've never fought Illidan then, in WHYDB it's actually properly scripted, you actually have the whole thing with Akama working, instead of just running up to him and facing only melee attacks (assuming he's attackable). Granted, I could probably get that working by applying the ArcScripts sql, and infact it works better with WHYDB with it applied, but still, it will work on an unpatched WHYDB, there's no lightning bolts from Akama and his ghostly friends when he opens the door, and the first thing Illidan says when you approach gets cut off, but the fight still works properly. WHYDB has most bosses for pre-LK instances working properly, and indeed most mobs in general. NCDB seems to still have much that is melee-only, still has problems with bosses such as Shade of Akama being unattackable, and how can you forget to spawn Thrall? WHYDB is once again taking the correct approach in doing it slowly but properly, they don't have Northrend spawned yet, but when they do, they will do it right, Sanctuary in Dalaran will actually work for example, with NCBD's pathetic hack you have people killing each other left and right. Just my opinion of course, but it looks like NCDB is going more for speed, less for accuracy.

[camfritz117]

ahh i didnt even think of that thx

Woot! it worked thx everyone

[qiksmash]

how can i use cheats and stuff like item stat changer on this

[Kabukiblood]

how can i use cheats and stuff like item stat changer on this

Your a GM use the GM Commands.

[Maytricks]

anyone have a howto use the WoW Item Parse.exe and get the sql files into the game?

[qiksmash]

where are the gm commannds

[Kabukiblood]

where are the gm commannds

http://blizzardoutlaws.bravehost.com/download/GM%20Commands.txt

[qiksmash]

where do use the gm commands like in chat or something

[Kabukiblood]

where do use the gm commands like in chat or something

Yes in chat.
Step 1 press enter to bring up chat in world.
Step 2 (This is very important) type . <--- Yes that is a period.
Step 3 Enter command.
Step 4 Press Enter.

[qiksmash]

so as an eg what would i type for modify hp

[Kabukiblood]

so as an eg what would i type for modify hp

enter
.modify hp 100000 100000
enter

[qiksmash]

ty

[Tashikie]

Hey, sorry about the noobie question, but I'm not exactly sure how to log in. I'm sorry if it's common knowledge, I'm just not sure what I should put in as my login information. Do I have to change anything in the .conf files?

[Simzy]

Sorry to everyone who tried using Tsoforever2's forum but there was some problems but im glad to announce that its back so any and all problems can be posted there and someone will be happy to help http://projectnorthrend.ath.cx/en/ (Project Northrend)

[Tsoforever2]

admin and admin

[Simzy]

Hey, sorry about the noobie question, but I'm not exactly sure how to log in. I'm sorry if it's common knowledge, I'm just not sure what I should put in as my login information. Do I have to change anything in the .conf files?

If your using it for yourself dont change anything but use admin as username and password and it will log you in

[qiksmash]

i cant get to northrend the boat doesnt showup wat can i do

and how do i raid on my own

[nicdude]

If I swap the right dbc's from another repack, will it make the spells work better?

EDIT- Nvm, it worked, I got proto-drakes and all those mounts to work by swapping the dbc's with a more spell focused repack(Not dissing TSO's repack) Anyway, the flying mounts wont summon in northrend. The spell works, but the flying mount doesn't appear.

[Kabukiblood]

If I swap the right dbc's from another repack, will it make the spells work better?

EDIT- Nvm, it worked, I got proto-drakes and all those mounts to work by swapping the dbc's with a more spell focused repack(Not dissing TSO's repack) Anyway, the flying mounts wont summon in northrend. The spell works, but the flying mount doesn't appear.

Where did you get the dbc from?

[nicdude]

I just swapped the whole dbc file with the one in this repack.

here's the link:RapidShare: Easy Filehosting (http://rapidshare.com/files/165202257/Wrath_of_the_Lich_King_-Update_1.rar)

Note- Barbershops work too. You just have to spawn the gameobject. Type .lookup object barber then spawn the last object on the list for a working barbershop chair.

Note2- Sorry TSO. please tell me if this dbc swap thing is not okay with you and I'll delete the link.

Note3-Credits for this repack go to Treston323 ad MMowned.

Last Note- The repack in the link I posted is not nearly as good as TSO's. It just has a better dbc file.

[Sentetsu]

I swear this repack hates me, I finally got and installed WotLK and the stupid won't work. I can log on but when I try to play a normal character I get a critical error and when I try to play a DK I get disconnected.

[qiksmash]

i cant get to northrend the boat doesnt showup wat can i do

and how do i raid on my own

[CosMic92]

raid= .ch trigger

[Raistlin77]

Actually, you don't have to type "trigger" when "tr" will suffice, so, ".ch tr" and you can get into any instance, regardless of level or grouping requirements. Similarly, ".ch g" is all it takes for god mode (aka, what you'll need to survive going into a raid instance solo).

qiksmash, GMs don't use public transportation, they have the ".recall port" command (that's ".rec p" if you like to keep things short). To get to Dalaran in Northrend (make sure you type ".ch g" first and god mode is on, you're about to take a 30 foot drop), you type ".rec p dalaran" for example. For anyone who might be using whydb it's actually ".rec p dalarancity" (and it actually puts you at ground level, though granted, the city is empty) because if you just type "dalaran" it takes you to Dalaran Crater (Dalaran's former location) and you take a 30 foot drop because Dalaran isn't there anymore. Just to let anyone else who might be switching back and forth between DBs like I am know. Because basically, when I'm creating a normal, non-DK character, it's better for me to start off using whydb with it's properly working blood elf starting area, then ".rec p dalarancity" to get to Northrend, shutdown world, switch to NCDB, restart world, and I'm ready to go Lich King hunting. I tried to merge the two DBs but no luck so far. Anyway, qiksmash, if you need the official list of GM commands, you can find it here (http://upload.virtual-angel.de/command-list.xml).

Seems a bit strange grabbing dbcs from another repack, if you need to update dbcs there's a thread for cores and databases right here (http://www.ac-web.org/forum/releases/39822-release-wotlk-3-x-x-compiles-database.html) so you could probably have just used that, but whatever works for you. I would advise updating to the latest Arcemu core anyway, it's just a good idea to keep Arcemu updated because they're always making improvements and fixing bugs. It's not difficult, delete everything except the "config", "maps", and "vmaps" folders (and the "dbc" folder if for some reason you would rather keep your old ones) in your repack's "Arcemu" folder, copy everything except the "config" folder over from the place you extracted the new core to (of course, you'll want to leave out the "dbc" folder as well if you want to keep your old ones), done. You may want to apply any new sqls to your world and character databases as well using Navicat, anything with a number higher than 1697 would be a good idea since that's the version that was included in this repack. Not to make this repack sound old and outdated, Arcemu just releases new versions very quickly, sometimes multiple times a day.

[aliexo]

ow.. so thats trigger... >.>

i thought it had something to do with flyhacks etc..

[Raistlin77]

yeah, the triggerpass cheat is for going anywhere you want, to catch flyhacks you summon the accused player to you while you're flying. If they don't fall to the ground and die immediately, you select them, type ".ch f" on them and see if they fall. If they do, then a GM gave them the fly cheat as a reward or something, if not, they're flyhacking ;) Don't forget to resurrect the person if they do fall to their death of course, it means they're innocent after all, lol.

Oh yeah, one thing I forgot to mention in the previous post, you can't say ".revive" if you're dead because "dead people can't talk" so you have to say that one in the general chat channel -- you would type "/1 .revive" and it works (I get the feeling someone was going to ask that one next).

[qiksmash]

now i bought the mammoth mount and as soon as i use it i learn it and havnt got the place to summon it how do i fix that now

[Raistlin77]

That's a strange one indeed, qiksmash, you learn it? Like it's a spell? Well, then stop using the item and go into your spell list and cast it I guess, lol. That just seems strange. Oh well, as we all know, it's going to be a while before all of this works right. Just the nature of the beast, you get things working their best right before they become obsolete, when they finally get Lich King working well, another expansion will hit (followed by more hastily thrown together speed hacks, followed by accurate databases which arrive just in time to be obsoleted yet again, and on for infinity, or at least until the peak oil crisis causes 90% of the power grid to fail). Later, I have an iphone to jailbreak and I haven't even setup the VM to install iTunes to (and there's no way I'd foul my fresh Windows install up with Apple's garbage -- honestly, I wish he'd just sell it, get a Cowon A3, PSP, and a decent cell phone, he'd be better off).

[Danne-sm]

When i am trying to remove it from my PC couse i need to reinstall it, it cant remove ''Item Retriver'' couse it says i have it open how can i remove it?

[yuniorvoltes]

Transports not work how i fix that

Some Professions not work ex: Minig , Skinin, Blacksmith, Enchanting the say need some item but the item is in the bag and not work

The shaman totems not work

help please

[Tsoforever2]

OK people this thread has turned to rubbish im making a new one
and no alot of things are bugged but i can't fix it all im not god

[Alphy11]

Could I use a MySQL installation instead of the MySQL.bat? if so, how?

[aliexo]

tso.. we are already happy if u let the instances,mobs and drop work..

[Maytricks]

Tso is there a web Http:// management with this repack like in the repack for creating accounts with out heidi or navicat?

[Kabukiblood]

Tso is there a web Http:// management with this repack like in the repack for creating accounts with out heidi or navicat?

That hasn't been setup in this repack yet but I am sure she will have it soon.

[Tsoforever2]

Closed From Sanders Of Ac-web

[Maytricks]

Thank you TSo for the repack

[Kabukiblood]

Closed From Sanders Of Ac-web

Awesome I hope Sanders is Banned as well.